You are currently shopping on our Canadian Store.
Click here to switch stores.
Taking care of a respirator is very important as it will not only extend the life of the product but also ensure you are wearing a clean and disinfected respirator ever time.
Maintenance & Care Instructions For Comfort-Air® Respirators Read More »
According to the Occupational Safety & Health Administration (OSHA), the Center for Disease Control (CDC), the U.S. Department of Health, and the University of Michigan, employees required to work in high temperature environments should be allowed to take frequent breaks in a cool place. “High Temperature Work Environments” are generally referred to as the following:
When filters or chemical cartridges are left in the open air with contaminants present in the air, the service life of the filters or cartridges can be compromised. Particulate contaminants can build up on the surface of the filter or adversely affect the electrostatic charge in the filter if so designed. Cartridges may also absorb
Proper Storage of Filters and Cartridges Read More »
Personal Fall Arrest System Anchorage Points Calculating Fall Clearance Distance Using a Retractable Lifeline First, add the maximum free fall distance (2 ft.) with a retractable lifeline to the maximum deceleration distance (3-1/2 ft.) to the average height of a worker (6 ft.). Then, add a safety factor of 3 ft. to allow for the
Proper fit is critical for personal safety & working comfort. The charts below specify how to
measure your body for the correct fit of Fall Protection equipment.
Fall Protection Sizing Guide & Symbols Read More »
All aisles and walkways should be kept free of clutter and debris. Oil spills and other slippery materials should be cleaned up immediately. Areas that are slippery because of the continuous use of water–common in the floriculture industry–should be off-limits as general traffic areas and restricted to those workers who must perform their duties in
Factors to Consider in Fall Protection & OH&SA- Employers General Responsibilities Read More »
When it comes to his experience with Dentec Safety and the New Comfort- Air®NxMD respirator, Dr. O’Toole sums it up by saying “The Comfort-Air®NxMD is easy to source, easy to stock and maintain, comfortable and unobtrusive, much more cost effective and most importantly a smaller output on the environment. A Great Product and Great Customer Service! Thank you Dentec Safety!”
Dr. O’Toole Keeps His Practice Open & Operating SafelyThanks to the Comfort-Air®NxMD Read More »
After the pandemic hit and the regulations mandated that N95 respirators be worn when performing aerosol-generating procedures on patients, Dr. Hoffman found himself quickly trying to source and fit test N965 respirators. “The two biggest benefits of the Comfort-Air®Nx in is the cost savings AND the sustainability aspect!”
Dr. Lloyd Hoffman Perio Comfort-Air®Nx Testimonial Read More »
The OH&S SafetyPod Editor and host Sydny Shepard sits down with Claudio Dente to discuss how the pandemic led to a creation of superior respiratory protection.
Dentec Safety is proud to announce that they have been awarded a portion of the U.S. Department of Health and Human Services, Office of the Assistant Secretary for Preparedness and Response contract for their reusable elastomeric respirator without an exhalation valve to protect the healthcare and frontline workers.
Never miss an update! Subscribe to our newsletter.
