DHTML JavaScript Website Pull Down Navigation Menu By Milonic

Dentec Safety Specialists, Inc.

WARNING: All products must be used in a specified manner in which they are intended. Instructions must be read, understood and followed prior to use. Users should be trained in the use of this equipment prior to use. Failure to use in the specified manner could result in serious injury or death. Check with local authorities for regulations governing the use of fall protection. This product conforms to OSHA and CSA Standards at date of manufacture.


SAVE A LIFE PROGRAM

People working at heights risk their lives everyday and look forward to going home after work to be with their loved ones. Working at heights is a tough and scary job and we have to thank those that do this for a living be it on sky scrappers, bridges, power towers, offshore platforms or working on a roof to name a few.

Dentec Safety is committed to protecting people whether they are working in a workplace or at home. We stand behind our products and the people that count on them every day.

This is how our SAVED A LIFE PROGRAM works:

  • When an individual falls while wearing a Dentec Safety harness and lanyard, we will provide them with free replacement products that were used to save their life.
  • Simply return the used harness and lanyard to Dentec Safety Specialists with a letter providing the details and date of the fall and we will send a new replacement harness and lanyard free of charge along with a SAVED A LIFE CERTIFICATE.

Dentec Safety


KEY DESIGN FEATURES

Dentec Safety

Lanyard Keeper On Harnesses

High quality lanyard keeper provides the best combination of durability and performance.

Dentec Safety

Lanyard Parks On Lanyard Hooks

Located on the hook of all Web Devices lanyards. Extra lanyard park available when the lanyard park on the harness breaks.

Dentec Safety

Plastic Ends

Located at the end of the harness straps prevents the web material from fraying and allows the user to grab the ends to tighten the strap even with work gloves.

Dentec Safety

Foam Lined Backpad

Dentec Safety uses a combination of a foam material and a breathable mesh fabric. The foam padding provides support but moves with the body as you bend and turn. The mesh fabric is breathable and allows perspi- ration to dry quickly. This combination pro- vides additional comfort and performance for extended use.

Dentec Safety

Quick Connect Buckles

Dentec Safety quick connect buckles are available in either steel or aluminum with anti-panic latches that require the user to push the clips forward to open. Pro- vides extra security in a fall situation.

Dentec Safety

Friction Adjustment

Optional adjustment allows for quick and simple sizing adjustment when needed.

Dentec Safety

Inspection Tag Cover

All harness come with a 360 inspection cover made of heavy duty nylon. Provides complete protection of all inspection tags against the elements such as sun, dirt, rain, snow, oils, etc. Velcro closure allows for easy view of inspection tags.


HARNESSES

Dentec Safety

Custom Harness Imprinting

DENTEC offers a simple & easy imprinting program that will allow you to promote your company brand and identify your employees working on a site with multiple contractors.

Dentec Safety

RFID Tags

Optional radio-frequency identi cation tags can be added to all harnesses and lanyards. This automatically identi es and tracks the fall protection products for annual company inspections and re-certi cations. Software not provided.


ECO Harnesses
Dentec Safety

  • Full Body Harness.
  • Single Dorsal D-ring.
  • Soft webbing provides exceptional comfort and durability.
  • Plastic tips located at the end of each strap prevents fraying and allows the user to adjust the harness easily even when wearing work gloves.
  • High quality lanyard keepers.
  • Adjustable Mating Buckles on Chest Strap.
  • Available with adjustable mating buckles or tongue & buckle leg straps.
  • Rated to 310 lbs. (140kg) working weight.
Part # Description
16H33101FI Eco Harness MB 1-D Universal Size
16H33111FI Eco Harness MB 1-D 5 pt. Adj. Universal Size
16H33101002FI Eco Harness MB 3-D Universal Size
16H33102102FI Eco Harness MB 5-D Universal Size
16H33102FI Eco Harness TB 1-D Universal Size
16H33102002FI Eco Harness TB 3-D Universal Size
16H33101FI URT Eco Harness in Retail Box MB 1-D Universal Size
16H33102FI URT Eco Harness in Retail Box TB 1-D Universal Size
16H33101FI URTL Eco Harness in Retail Box with 6' Lanyard 3/4" hooks MB 1-D Universal Size

Dentec Safety

BLACK WIDOW Harnesses

Our most comfortable harness!

  • Full Body Harness with Tubular Webbing and built in memory padding provides outstanding comfort. No need for shoulder pads!t
  • Single Dorsal D-ring.
  • 5 Point Adjustment.
  • Plastic tips located at the end of each strap prevents fraying and allows the user to adjust the harness more easily even when wearing work gloves.
  • Adjustable Torso Straps.
  • High quality lanyard keepers.
  • Available with aluminum anti-panic quick connect buckles, adjustable mating buckles or tongue & buckle leg straps.
  • Rated to 310 lbs. (140kg) working weight.
Part # Description
16H02777FI Black Widow Harness MB 1-D Universal Size
16H02777007FI Black Widow Harness MB 3-D Universal Size
16H02474FI Black Widow Harness QC 1-D Universal Size
16H02474007FI Black Widow Harness QC 3-D Universal Size
16H02772FI Black Widow Harness TB 1-D Universal Size
16H02772007FI Black Widow Harness TB 3-D Universal Size

Dentec Safety

BLACK WIDOW TOWER Harnesses

  • Full Body Harness with Tubular Webbing, built in memory padding, shoulder pads & removable seat.
  • Outstanding comfort, breathable padding on back, shoulder, waist, bar seat and leg straps, wicks persperation and dries quickly.
  • 8 Steel D-rings: One at back, two on hips, two on seat, one on chest strap and one on each shoulder.
  • 5 Point Adjustment.
  • Removable seat allows user to wear harness in other applications as a 6 D-ring harness.
  • Plastic tips located at the end of each strap prevents fraying and allows the user to adjust the harness more easily even when wearing work gloves.
  • Adjustable Torso Straps.
  • High quality lanyard keepers.
  • Aluminum anti-panic quick connect buckles on chest and leg straps.
  • Five inch back pad with accessory rings.
  • Rated to 310 lbs. (140kg) working weight.
Part # Description
16H535BWTS Black Widow Tower Harness QC 8-D Small
16H535BWTM Black Widow Tower Harness QC 8-D Medium
16H535BWTL Black Widow Tower Harness QC 8-D Large
16H535BWTXL Black Widow Tower Harness QC 8-D XLarge
16H535BWTXXL Black Widow Tower Harness QC 8-D 2XLarge
16H535BWTXXXL Black Widow Tower Harness QC 8-D 3XLarge

Dentec Safety

CONTRACTOR Harnesses

  • Full Body Harnesst.
  • Single Dorsal D-ring & Hip D-ring.
  • 5 Point Adjustment.
  • Shoulder Pads provide additional comfort when carrying tools.
  • Breathable foam back support material provides support while contouring to the individual's shape increasing overall comfort for extended use.
  • Plastic tips located at the end of each strap prevents fraying and allows the user to adjust the harness more easily even when wearing work gloves.
  • Adjustable Mating Buckles on Chest Strap.
  • Heavy Duty Friction Torso Strap Adjusters.
  • Removable Tool Belt & Lanyard Keeper.
  • Available in Tongue Buckle Leg Straps or Quick Connect with anti-panic latches.
  • Rated to 310 lbs. (140kg) working weight.
Part # Description
16H12352WSMFI Contractor Harness TB 3-D Small
16H12352WMFI Contractor Harness TB 3-D Medium
16H12352WLFI Contractor Harness TB 3-D Large
16H12352WXLFI Contractor Harness TB 3-D XLarge
16H12352WXXLFI Contractor Harness TB 3-D 2XLarge
16H123533WSMFI Contractor Harness QC 3-D Small
16H123533WMDFI Contractor Harness QC 3-D Medium
16H123533WLGFI Contractor Harness QC 3-D Large
16H123533WXLFI Contractor Harness QC 3-D XLarge
16H123533WXXLFI Contractor Harness QC 3-D 2XLarge
CONTRACTOR SERIES SIZING
Waist Sizes:28" - 34" Small
 34" - 38" Medium
 38" - 42" Large
 42" - 52" XLarge
 52" - 54" 2XLarge

Dentec Safety

CONTRACTOR PRO / CONTRACTOR PRO HI-VIZ Harnesses

  • Full Body Harness.
  • Single Dorsal D-ring.
  • 5 Point Adjustment.
  • Shoulder Pads.
  • Anti-panic Quick Connect Chest & Leg Straps.
  • Tongue Buckle Torso Straps.
  • Hip D-rings.
  • Removable Tool Belt.
  • Breathable foam back support material provides support while contouring to the individual's shape increasing overall comfort for extended use.
  • Retro Re ective Torso Front, Back & Waist Strips on Contractor Pro Hi-Vis.
  • Rated to 310 lbs. (140kg) working weight.
Part # Description
16H22363WSFI Contractor Pro Harness QC 3-D Small
16H22363WMFI Contractor Pro Harness QC 3-D Medium
16H22363WLFI Contractor Pro Harness QC 3-D Large
16H22363WXLFI Contractor Pro Harness QC 3-D XLarge
16H22363WXXLFI Contractor Pro Harness QC 3-D 2XLarge
16H22363WRSFI Contractor Pro Hi-Vis Harness QC 3-D Small
16H22363WRMFI Contractor Pro Hi-Vis Harness QC 3-D Medium
16H22363WRLFI Contractor Pro Hi-Vis Harness QC 3-D Large
16H22363WRXLFI Contractor Pro Hi-Vis Harness QC 3-D XLarge
16H22363WRXXLFI Contractor Pro Hi-Vis Harness QC 3-D 2XLarge

TOOL SPIDER

Dentec Safety

  • Designed to satisfy the need for elastic lanyards.
  • Reduce the frequency of dropped tools and worker injuries.
  • Elastic except 16ATS 6/80-0-12 it is made with lanyard material.
  • Attaches to a harness for easy mobility and exibility when reaching out with hand tools.
Part # Description Stretch Capacity Load
16ATS 18/30 TOOL SPIDER w/Aluminum Carabiner 18" - 30" 15 lbs. Capacity Load
16ATS 18/30 SG TOOL SPIDER w/Small Stainless Steel Screw Gate 18" - 30" 15 lbs. Capacity Load
16ATS 18/30-30 SG TOOL SPIDER w/Stainless Steel Screw Gate 18" - 30" 30 lbs. Capacity Load
16ATS 6/80-0-12 TOOL SPIDER w/Stainless Steel Screw Gate No Stretch 80 lbs. Capacity Load
14ATS HH-LANYARD HARD HAT LANYARD N/A N/A

ShockSorb SHOCK PACK LANYARDS

Dentec Safety

  • E4 Rated = up to 254 lbs. (115kg).
  • E6 Rated = up to 386 lbs. (175kg).
  • Lanyard Park included with every lanyard.
Part # Description - E4 Rated Part # Description - E6 Rate
16L111401 4' Single Leg w / 3/4" Hook 16LSL921401 4' Single Leg w / 3/4" Hook
16L111601 6' Single Leg w / 3/4" Hook 16LSL921601 6' Single Leg w / 3/4" Hook
16L111602 6' Single Leg w / 2 1/4" Hook 16LSL921602 6' Single Leg w / 2 1/4" Hook
16L1116A1 4'-6' Single Leg w / 3/4" Hook 16LSL9216A1 4'-6' Single Leg w / 3/4" Hook
16L1116A2 4'-6' Single Leg w / 2 1/4" Hook 16LSL9216A2 4'-6' Single Leg w / 2 1/4" Hook
16LSPL121401 4' Twin Leg w / 3/4" Hook 16LSL911401 4' Twin Leg w / 3/4" Hook
16LSPL121601 6' Twin Leg w / 3/4" Hook 16LSL921601 6' Twin Leg w / 3/4" Hook
16LSPL121602 6' Twin Leg w / 2 1/4" Hook 16LSL921602 6' Twin Leg w / 2 1/4" Hook
16LSPL1216A1 4'-6' Twin Leg w / 3/4" Hook 16LSL9216A1 4'-6' Twin Leg w / 3/4" Hook
16LSPL1216A2 4'-6' Twin Leg w / 2 1/4" Hook 16LSL9216A2 4'-6' Twin Leg w / 2 1/4" Hook
AVAILABLE OPTIONS:
Waist Sizes:  4', 6' or 4-6'
 3/4" or 2 1/4" Hook
 Single or Twin leg
 E4 or E6 Rated

ShockSorb INTERNAL LANYARDS

Dentec Safety

  • E4 Rated = up to 254 lbs. (115kg).
  • Lanyard Park included with every lanyard.
Part # Description
16LSLM3411 4' Yellow Single Leg w / 3/4" Hook
16LSM3611 6' Red Single Leg w / 3/4" Hook
16LSLM3421 4' Yellow Single Leg w / 2 1/4" Hook
16LSLM3621 6' Red Single Leg w / 2 1/4" Hook
16LSLM3612 4' Yellow Twin Leg w / 3/4" Hook
16LSLM3422 4' Yellow Twin Leg w / 2 1/4" Hook
16LSLM3422 6' Red Twin Leg w / 2 1/4" Hook
AVAILABLE OPTIONS:
 4' Yellow or 6' Red Colour Webbing
 Single or Twin leg
 3/4" or 2 1/4" Hook

WEB POSITIONING LANYARDS

Dentec Safety

Part # Description
16LP2211 2' - 1" Web positioning w / 3/4" Snap Hooks
16LP4211 4' - 1" Web positioning w / 3/4" Snap Hooks
16LP6211 6' - 1" Web positioning w / 3/4" Snap Hooks
16LP6A211 4' - 6' Single positioning w / 3/4" Snap Hook
AVAILABLE OPTIONS:
 2', 4' or 6' - 1" Web Positioning.
 4'-6' Single Positioning.
 3/4" Snap Hooks.

REBAR CHAIN ASSEMBLIES

Dentec Safety

Part # Description
16LRBC211 Rebar Chain Assembly
 Rebar positioning device.
 2.25" Rebar Hook.
 RBC model denotes chain.
 Chain 1' total length.

SELF RETRACTING DEVICES

Dentec Safety

  • Composite Housing.
  • Swivel Load Indicator Hook.
Part # Description Type
16SRL0072215 7' Web SRL 1
16SRL0072215TWIN 7' Web SRL Twin Pack 1
16SRL0112115 11' Web SRL 1
16SRL0201115 20' Cable SRL 2
16SRL0301115 30' Cable SRL 2
16SRL0501115 50' Cable SRL 2
OPTIONS:
 Cable or Web.
 20', 30', or 50' (Cable).
 7' Twin Pack (Web).
 7' or 11' (Web).
 Type 1 SRL : 1.5m - 3mg.
 Type 2 SRL : Greater than 3m.

TAGLINES

Dentec Safety
  • SRL Tagline
  • 1/4" Braided Rope
  • Swivel hook helps prevent entanglement
  • For use with SRD's
  • Extends the life of the retractable.
Dentec Safety
  • TLD2-size.
  • 5/8" Poly plus rope 10,000 lbs. Mbs.
  • Urethane coating.
  • 2" Gate opening carabiner with 5,000 lbs. mbs and 3,600 lbs. gate.
  • Tangle free.
  • Easy grip.
Part # Description
16STL15-SRL 15' SRL Tagline
16STL20-SRL 20' SRL Tagline
16STL25-SRL 25' SRL Tagline
16STL30-SRL 30' SRL Tagline
16STL50-SRL 50' SRL Tagline
16STL100-SRL 100' SRL Tagline
Part # Description
16ATLD2-15 25' Tagline / 10' Coated Orange / 15' Yellow Tube
16ATLD2-20 25' Tagline / 10' Coated Orange / 15' Yellow Tube
16ATLD2-25 25' Tagline / 10' Coated Orange / 15' Yellow Tube
16ATLD2-30 30' Tagline / 15' Coated Orange / 15' Yellow Tube
16ATLD2-35 35' Tagline / 15' Coated Orange / 20' Yellow Tube
16ATLD2-40 40' Tagline / 20' Coated Orange / 20' Yellow Tube

SIZING GUIDE & SYMBOLS

HOW TO MEASURE FOR A FULL BODY HARNESS (Measurements are over clothing)

Sizing Chart for Full Body Harnesses with Integral Waistbelt
Proper fit is critical for personal safety & working comfort. The charts below specify how to
measure your body for the correct fit of Fall Protection equipment.

Size Waist Measurement Inches Waist Measurement Centimetres
S 32-40 80-100
M 36-44 90-110
L 40-48 100-120
XL 44-52 110-130
2XL 48-56 120-140
3XL 52-60 130-150

Dentec Safety

ALL HARNESSES Are Rated To 310 lbs. (140kg) Working Weight
LANYARDS E4 RATED = Up To 254 lbs. (115kg)
LANYARDS E6 RATED = Up To 386 lbs. (175kg)


FALL CALCULATIONS

Personal Fall Arrest System Anchorage Points

Dentec Safety

Calculating Fall Clearance Distance Using a Retractable Lifeline

  • First, add the maximum free fall distance (2 ft.) with a retractable lifeline to the maximum deceleration distance (3-1/2 ft.) to the average height of a worker (6 ft.).
  • Then, add a safety factor of 3 ft. to allow for the possibility of an improperly fit harness, a taller than average worker and/or a miscalculation of distance.
  • The total, 14-1/2 ft. is the suggested safe fall clearance distance for this example.

Personal Fall Arrest System Anchorage Points

Dentec Safety

Calculating Fall Clearance Distance Using a Shock-Absorbing Lanyard and D-Ring Anchorage Connector

  • First, add the length of the shock-absorbing lanyard (6 ft.) to the maximum elongation of the shock absorber during deceleration (3-1/2 ft.) to the average height of a worker (6 ft.).
  • Then, add a safety factor of 3 ft. to allow for the possibility of an improperly fit harness, a taller than average worker and/or a miscalculation of distance.
  • The total, 18-1/2 ft. is the suggested safe fall clearance distance for this example.
Part # Description
16STL15-SRL 15' SRL Tagline
16STL20-SRL 20' SRL Tagline
16STL25-SRL 25' SRL Tagline
16STL30-SRL 30' SRL Tagline
16STL50-SRL 50' SRL Tagline
16STL100-SRL 100' SRL Tagline
Part # Description
16ATLD2-15 25' Tagline / 10' Coated Orange / 15' Yellow Tube
16ATLD2-20 25' Tagline / 10' Coated Orange / 15' Yellow Tube
16ATLD2-25 25' Tagline / 10' Coated Orange / 15' Yellow Tube
16ATLD2-30 30' Tagline / 15' Coated Orange / 15' Yellow Tube
16ATLD2-35 35' Tagline / 15' Coated Orange / 20' Yellow Tube
16ATLD2-40 40' Tagline / 20' Coated Orange / 20' Yellow Tube

Dentec Safety

ROOFER'S KIT

Dentec Safety

  • Full Body Eco Harness.
  • Polyester Lifeline 5/8" - Snap Hook on One End / Thimble on the Other End.
  • Permanently Attached 2' Rope Grab and ShockSorb Assembly.
  • Roof Anchor.
  • Stowage Pail.
  • Aluminum Mating Buckle Chest Strap.
  • Options: 25' or 50' Lifeline Length.
Part # Description
16KROOF25 Roofer's Kit with 25' Lifeline
16KROOF50 Roofer's Kit with 50' Lifeline

ROPE GRABS

Dentec Safety
  • Attached 2' Shock Pack Lanyard.
  • 3/4"" Snap Hook.
Dentec Safety
  • Fits 5/8" 3-strand rope.
  • 2.44" Ring - Anti-Inversion / Anti-Panic.
Part # Description
16LRGGR 85-52S 5/8" Trailing Rope Grab
Part # Description
16RG19260-2 R5/8" Trailing Rope Grab w/ 2.44" Ring - Anti-Inversion / Anti-Panic

LIFELINES

Dentec Safety

Available Options:

  • 25', 30', 50', 75' or 100' with 3/4" Snap Hook / Thimble Eye.
  • 25' or 50' with Thimbles on each end.
  • 50' 3/4" Snap Hook on each end.
Part # Description
16VL50 50' - 5/8" Rope Lifeline with 3/4" Snap Hooks on each end
16VL25-TT 25' - 5/8" Rope Lifeline with Thimbles on each end
16VL25-TT 50' - 5/8" Rope Lifeline withThimbles on each end
16VL25-1 Vertical Lifeline - 5/8" x 25' with 3/4" Snap Hook / Thimble Eye
16VL30-1 Vertical Lifeline - 5/8" x 30' with 3/4" Snap Hook / Thimble Eye
16VL50-1 Vertical Lifeline - 5/8" x 50' with 3/4" Snap Hook / Thimble Eye
16VL75-1 Vertical Lifeline - 5/8" x 75' with 3/4" Snap Hook / Thimble Eye
16VL100-1 Vertical Lifeline - 5/8" x 100' with 3/4" Snap Hook / Thimble Eye

ROOF ANCHORAGE

Dentec Safety

Reusable

  • For temporary use on wood rooftops.
  • Can be installed with screws or duplex nails.
  • Fits up to 12/12 roof pitch.
  • Can be used between trusses when all holes are filled.
  • Meets standards for fall arrest.
Dentec Safety

Single-Use

  • For temporary use on wood rooftops.
  • Fits any roof pitch.
  • Can be used between trusses when all holes are filled.
  • Meets standards for fall arrest.
  • Easy installation.
Part # Description
16AD13053-1 Reusable Roof Anchor
Part # Description
16AD13057-1 Single-Use Roof Anchor

PIPE ANCHOR HOOKS

Dentec Safety

Handy Hook

  • Stainless Steel Anchor.
  • Electro Polished 304.
  • 2" Anchor Connector Size.
  • Hybrid Connector.
Part # Description
16ADHANDHOOK 2 2" Pipe Anchor Hook

CONCRETE ANCHOR STRAPS

A versatile product, Concrete Anchor straps are gaining in popularity as an inexpensive anchor solution. As a disposable anchor point, our straps can be used in other applications such as wood framing members, rebar, pipe racking, etc.

Dentec Safety

Available Options:

  • 3', 4' or 6' - 1" 9800 lb webbing loop to loop.
  • 3' with 24" wear pad loop on one end / D ring on other end.
  • 4' or 6' with 36" wear pad loop on one end / D ring on other end.
Part # Description
16SLCON1-300LL 3' - 1" Concrete Anchor Strap 9800 lb. webbing loop to loop
16SLCON1-408LL 4' - 1" Concrete Anchor Strap 9800 lb. webbing loop to loop
16SLCON1-608LL 6' - 1" Concrete Anchor Strap 9800 lb. webbing loop to loop
16SLCON1-324L2 3' - Concrete Anchor Strap with 24" Wear Pad loop / D-Ring
16SLCON1-436L2 4' - Concrete Anchor Strap with 36" Wear Pad loop / D-Ring
16SLCON1-636L2 6' - Concrete Anchor Strap with 36" Wear Pad loop / D-Ring

CONCRETE ANCHORS

Dentec Safety

5K CONCRETE ANCHOR

  • 3/4" hole diameter, 3" deep minimum.
  • 5,000 lb. capacity.
  • Designed for single user connection.
  • Great for anchoring scaffolding.
  • Use on vertical or overhead applications.
  • Designed for use in cured concrete with a compression strength of at least 3000 psi.
  • Easy installation, compress spring and insert cable shaft into hole.
  • Constructed of stainless steel, aluminum and other non-corrosive materials.
  • Temporary, reusable.
Dentec Safety

10K CONCRETE ANCHOR

  • Shall only be used as a personal anchorage connector.
  • Warning! Web Devices cannot be held responsible for other HLL Systems which could be used with this anchorage connector.
  • Users shall be responsible for any connections to this anchorage connector other than the recommended components.
Part # Description
16ADCONN-00235 3/4" 5K Portable Concrete Anchor Connector
16ADCONN-00236 1" 10K Portable Concrete Anchor Connector

PORTABLE ANCHORING DEVICES

Dentec Safety

16ADCONN-AO46FS
5/8" D-RING ANCHOR CONNECTOR

  • Fixed Forged Anchor Connector.
  • Mounting surface must have minimum tensile strength of 5,000 lbs.
  • 2 13/32" tall x 2 7/16" wide.
Part # Description
16ADCONN-AO46FS 5/8" D-Ring Anchor Connector
16ADBMRBWA012N 12" I-Beam Slider/ Push Button / Fixed other end
16ADBMR-BWA014B 14" x 3 1/4" I-Beam Slider / 2 Side Adjustment
16ADTROLLEY 310 Trolley Slider
16ADBC-15 Fixed Vertical / Horizontal Anchor

I-BEAM SLIDER

Dentec Safety

16ADBMRBWA012N

  • Horizontal Beam.
  • Cast Aluminum.
  • 3 1/4" x 12".
  • Adjustable Push button end / Fixed End.
  • Static tensile strength: 5,000 lbs. minimum.
  • Net weight 4 lbs.
Dentec Safety

16ADBMR-BWA014B

  • Horizontal Beam.
  • Steel.
  • 3 1/4" x 14".
  • Both ends are adjustable.
  • Static tensile strength: 5,000 lbs. minimum.
  • Net weight 4 lbs.

FIXED VERTICAL / HORIZONTAL ANCHOR

Dentec Safety

16ADBC-15

  • For Anchorage Connection on structural beams up to 15" wide.
  • 10,000 lbs. capacity.

TROLLEY SLIDER

Dentec Safety

16ADTROLLEY 310

  • Horizontal Beam.
  • Aluminum cross bar & rollers.
  • Polyester webbing.
  • Zinc Plated Steel swivel.
  • Stainless Steel spring & hardware.
  • Beam flange width range: 3" - 10".
  • Beam flange thickness: Up to 7/8".
  • Static tensile strength: 5,000 lbs. minimum.
  • Net weight 7.7 lbs.

RESCUE POLE

Dentec Safety
  • Extendable 8 ft. - 15 ft. Combination Aluminum and Fiberglass Pole.
  • Stainless Steel Hook Assembly.
  • 2 Double Sheave Stainless Steel Swivel Blocks.
  • 100 ft. - 7/16" Kernmantle Rope.
  • 4 ft. Anchor Sling.
  • Fail-Safe Prusik Hitch and Carabiner.
  • Heavy Duty Vinyl Reinforced Stowage Bag.
  • Laminated Instruction Sheet & Video.
Part # Description
16ADRP 815 Rescue Pole Kit Complete with Bag
16ADMSC-BAG-RP Rescue Pole Stowage Bag

CARABINERS

Dentec Safety
Part # Description
16AD17426 PIN / ATL / FR / 2 1/4" GO / 45kN / 3.6M Gate
16AD17443 ATL / FR / 1 1/16" GO / 35kN / 3.6M Gate
16AD17450 ATL / FR / 1/2" GO / 40kN / 3.6M Gate

SUSPENSION TRAUMA RELIEF - SELF RESCUE

Dentec Safety

During a fall arrest the Leg Up will partially deploy. The user can then easily pull it from the pouch and nd a comfortable sitting or standing position.

Leg Up

  • Provides user relief in post fall arrest suspension trauma by keeping the user's blood flowing.
  • Web bridle and adjustable foot stirrups fit easily into a convenient pouch.
  • Easily retro tted to any full body harness without alteration.
  • Attaches to D-Ring.
  • US Patent Pending.
Part # Description
16ALU-2NA Trauma Strap Non Adjustable
16ALU-2 Trauma Strap Adjustable

RETAIL PACKAGING

Dentec Safety

ECO Harnesses

Part # Description
16H33101FI URT Eco Harness in Retail Box MB 1-D Universal Size
16H33102FI URT Eco Harness in Retail Box TB 1-D Universal Size
16H33101FI URTL Eco Harness in Retail Box with 6' Lanyard 3/4" hooks MB 1-D Universal Size
Dentec Safety

CONTRACTOR Harnesses

Part # Description
16H12352WSMFI URT Contractor Harness in Retail Pail TB 3-D Small
16H12352WMFI URT Contractor Harness in Retail Pail TB 3-D Medium
16H12352WLFI URT Contractor Harness in Retail Pail TB 3-D Large
16H12352WXLFI URT Contractor Harness in Retail Pail TB 3-D XLarge
16H12352WXXLFI URT Contractor Harness in Retail Pail TB 3-D 2XLarge
Dentec Safety

ShockSorb SHOCK PACK LANYARDS

Part # Single Leg - E4 Rated Part # Twin Leg - E4 Rated
16L111401RT 4' Single Leg w / 3/4" Hook
in Retail Box
16LSPL121401RT 4' Twin Leg w / 3/4" Hook
in Retail Box
16L111601RT 6' Single Leg w / 3/4" Hook
in Retail Box
16LSPL121601RT 6' Twin Leg w / 3/4" Hook
in Retail Box
16L111602RT 6' Single Leg w / 2 1/4" Hook
in Retail Box
16LSPL121602RT 6' Twin Leg w / 2 1/4" Hook
in Retail Box
Dentec Safety

ShockSorb INTERNAL SHOCK LANYARDS

Part # Single Leg - E6 Rated Part # Twin Leg - E6 Rated
16LSM3612RT 6' Single Leg w / 3/4" Hooks
in Retail Box
16LSLM3422RT 4' Twin Leg w / 2 1/4" Hooks
in Retail Box
16LSLM3621RT 6' Single Leg w / 2 1/4" Hooks
in Retail Box
16LSLM3622RT 6' Twin Leg w / 2 1/4" Hooks
in Retail Box
Dentec Safety

SUSPENSION TRAUMA RELIEF SELF RESCUE

Part # Description
16ALU-2NART Trauma Strap Non Adjustable in Retail Box
Dentec Safety

ROPE GRABS

Part # Description
16LRGGR 85-52SRT 5/8" Trailing Rope Grab in Retail Box
Dentec Safety

CONCRETE ANCHOR STRAPS

Part # Description
16SLCON1-300LLRT 3' - 1" Concrete Anchor Strap 9800 lb. webbing loop to loop in Retail Box

Dentec Safety Specialists, Inc.
100 Harry Walker Parkway North, Newmarket, ON L3Y 7B2
tel: 905-953-9946 • fax: 905-953-8351

e-mail: dentec@dentecsafety.com